User Tools

Site Tools


upgrade_wifi_firmware:tina2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
upgrade_wifi_firmware:tina2 [2019/09/26 01:16]
peter
upgrade_wifi_firmware:tina2 [2019/09/26 01:36] (current)
peter
Line 9: Line 9:
 ====3. If there is new WIFI firmware, Begin ota updating... will be prompted on the screen.==== ====3. If there is new WIFI firmware, Begin ota updating... will be prompted on the screen.====
 Wait 1 minute, after the firmware upgrade is complete, the screen will prompt OTA update completed. Wait 1 minute, after the firmware upgrade is complete, the screen will prompt OTA update completed.
-If the screen prompts Firmware Upgrades Failed or more than 3 minutes, the upgrade does not end, please turn off the printer power, wait 10 seconds, then try again.====+If the screen prompts Firmware Upgrades Failed or more than 3 minutes, the upgrade does not end, please turn off the printer power, wait 10 seconds, then try again.
  
upgrade_wifi_firmware/tina2.txt ยท Last modified: 2019/09/26 01:36 by peter