Welcome To Use Spark Network Control System！
The Spark system is a hardware system developed by Nanjing WEEDO 3D Technology Co., Ltd. to provide enhanced network control functions for 3D printers.
Spark system uses high-performance quad-core Cortex-A7 processor, running frequency 1.2GHz, Mali400MP2 GPU, 1GB DDR3RAM, 16GB Flash, 1000M Ethernet, 802.11 b/g/n wireless network, OLED display.
Spark's software system is based on open sourceOctoPrint, It has been deeply optimized and integrated to support WEEDO's full range of printers.
Spark system and 3D printing slicing software developed by Jiangsu Wiiboox Technology Co., Ltd. Introduction to WiibuilderDeeply integrated，In Wiibuilder slice fileSend a print file with one click can send to the Spark system and start printing automatically.
The Spark system has the functions:
For details on how to use the Spark system, see the following documents.: