User Tools

Site Tools


spark_video

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

spark_video [2019/11/22 02:05]
peter created
spark_video [2019/11/29 00:03] (current)
peter
Line 1: Line 1:
-=====Spark系统视频监控===== +=====Spark ​system video surveillance===== 
-====打开Spark页面==== +====Open the Spark page==== 
-打开Wiibuilder中的OctoPrint连接窗口,点击在浏览器中打开,可以打开SPARK主界面。\\ +Open the OctoPrint ​connection window in Wiibuilder and click Open in browser to open the main SPARK interface.\\ 
-或是打开浏览器,在地址栏中输入http://​xxx.xxx.xxx.xxx\\ +Or open your browser and enter http://​xxx.xxx.xxx.xxx ​in the address bar\\ 
-xxx.xxx.xxx.xxx是SPARK显示屏上显示的IP地址。\\+xxx.xxx.xxx.xxx ​is the IP address shown on the SPARK display.\\
 \\ \\
 {{:​spark_video_1.jpg?​nolink|}}\\ {{:​spark_video_1.jpg?​nolink|}}\\
Line 9: Line 9:
 \\ \\
 ---- ----
-====远程手动控制==== +====Remote manual control==== 
-进入Control面板,先点击X/YZ下面的小房子图标,对XYZ轴进行归位,然后就可以点击各个箭头,手动控制喷头移动。\\ +Enter the Control ​panel, first click the small house icon under X / Y and to home the XYZ axis, then you can click each arrow to manually control the nozzle movement.\\ 
-箭头下方的一排数字是点动的距离。\\+The row of numbers below the arrow is the jog distance.\\
 \\ \\
 {{:​spark_video_2.jpg?​nolink|}}\\ {{:​spark_video_2.jpg?​nolink|}}\\
Line 17: Line 17:
 \\ \\
 ---- ----
-====远程启动打印==== +====Remote start printing==== 
-在文件管理栏中找到要打印的文件,点击最右侧的打印图标,可以立即启动打印任务。\\+Find the file to be printed in the file management bar, and click the print icon on the far right to start the print task immediately.\\
 \\ \\
 {{:​spark_video_3.jpg?​nolink|}}\\ {{:​spark_video_3.jpg?​nolink|}}\\
Line 25: Line 25:
 \\ \\
 ---- ----
-====切换监控画面==== +====Switch monitoring screen==== 
-点击打印状态面板右上角的两个小图标,可以分别切换为全窗口显示模式和全屏显示模式和\\+Click the two small icons in the upper right corner of the print status panel to switch to full window display mode and full-screen display mode, respectively\\
 \\ \\
-全窗口显示模式,监控画面占满浏览器窗口。\\+Full window display mode, the monitor screen fills the browser window.\\
 \\ \\
 {{:​spark_video_4.jpg?​nolink|}}\\ {{:​spark_video_4.jpg?​nolink|}}\\
 \\ \\
 \\ \\
-全屏显示模式,监控画面占满整个屏幕,按键盘上的ESC键可退出全屏模式。\\+Full-screen display mode. The monitoring screen fills the entire screen. Press the ESC key on the keyboard to exit the full-screen mode.\\
 \\ \\
 {{:​spark_video_5.jpg?​nolink|}}\\ {{:​spark_video_5.jpg?​nolink|}}\\
spark_video.txt · Last modified: 2019/11/29 00:03 by peter