User Tools

Site Tools


software_use:tina2

WEEDO wiibuilder slicing software

Faster model loading and slicing

1.Open the Wiibuilder slicing software, click the "file" in the upper left corner to select the corresponding model, and click the "slicing settings" button in the menu bar to pop up the basic slicing parameters settings interface, as shown in the figure:

2.After changing the parameters, click "Slice" to convert the files.

3.The advanced parameters of wiibuilder slicing software can be changed according to the user's model characteristics. The following documents are specified in detail.

software_use/tina2.txt · Last modified: 2019/09/26 20:58 by peter