User Tools

Site Tools


octoprint_connect_tina2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
octoprint_connect_tina2 [2019/11/22 01:13]
peter
octoprint_connect_tina2 [2019/11/22 01:30] (current)
peter
Line 11: Line 11:
 {{ :​octoprint_connect_tina2_03.png?​nolink |}} {{ :​octoprint_connect_tina2_03.png?​nolink |}}
 \\ \\
-2. General窗口中输入,Name:​TINA2,Model:​WEEDO TINA2。\\+2. Enter in the General ​window,Name:​TINA2,Model:​WEEDO TINA2。\\
 \\ \\
 {{ :​octoprint_connect_tina2_04.png?​nolink |}} {{ :​octoprint_connect_tina2_04.png?​nolink |}}
 \\ \\
-3. Print bed & build volume窗口中,将X, Y, Z轴长度全部改为100mm,取消选择Heated bed\\+3. In the Print bed & build volume ​window, change the lengths of the X, Y, and axes to 100mm and deselect the Heated bed.\\
 \\ \\
 {{ :​octoprint_connect_tina2_07.png?​nolink |}} {{ :​octoprint_connect_tina2_07.png?​nolink |}}
 \\ \\
-4. Axes窗口中,将X, Y轴的速度改为3000,选择Y轴的Invert control。点击Save,保存退出。\\+4. In the Axes windowchange the speed of the X and axes to 3000 and select the Invert control ​of the Y axis. Click Save to save and exit。\\
 \\ \\
 {{ :​octoprint_connect_tina2_06.png?​nolink |}} {{ :​octoprint_connect_tina2_06.png?​nolink |}}
 \\ \\
 \\ \\
-====设置GCODE脚本====+====Set the GCODE script====
 \\ \\
-进入OctoPrint设置界面,OCTOPRINT->​GCODE Scripts,进行如下设置\\ +  Enter the OctoPrint ​settings interface,OCTOPRINT->​GCODE Scripts,Make the following settings\\ 
-  ​Before print job starts栏内输入W1 +  ​Enter W1 in Before print job starts 
-  ​After print job completes栏内输入W2 +  ​Enter W2 in After print job completes 
-  ​After print job is cancelled栏内输入W3 +  ​Enter W3 in After print job is cancelled 
-  ​After print job is paused栏内输入W4 +  ​Enter W4 in After print job is paused 
-  ​Before print job is resumed栏内输入W5 +  ​Enter W5 in Before print job is resumed 
-  ​After connection to printer is established栏内输入W6 +  ​Enter W6 in After connection to printer is established 
-  ​Before connection to printer is closed栏内输入W7+  ​Enter W7 in Before connection to printer is closed
 {{ :​octoprint_connect_tina2_11.png?​nolink |}} {{ :​octoprint_connect_tina2_11.png?​nolink |}}
 {{ :​octoprint_connect_tina2_12.png?​nolink |}} {{ :​octoprint_connect_tina2_12.png?​nolink |}}
-完成后,点击Save保存退出+When you are done, click Save to save.
 \\ \\
  
-====添加插件====+====Add plugin====
 \\ \\
-进入OctoPrint设置界面,OCTOPRINT->​Plugin Manager,点击Get More...按钮Search...栏中分别输入DisplayLayer和PortLister安装如下两个插件,安装完成后重启OctoPrint系统\\+Enter the OctoPrint ​settings interface,OCTOPRINT->​Plugin Manager,Click the Get More... ​buttonEnter DisplayLayer and PortLister in the Search... ​column.Install the following two plugins, restart the OctoPrint ​system after the installation is complete.\\
 {{ :​octoprint_connect_tina2_13.png?​nolink |}} {{ :​octoprint_connect_tina2_13.png?​nolink |}}
 {{ :​octoprint_connect_tina2_14.png?​nolink |}} {{ :​octoprint_connect_tina2_14.png?​nolink |}}
 \\ \\
 \\ \\
-====DisplayLayerProgress Plugin插件设置====+====DisplayLayerProgress Plugin ​Plugin setting====
 \\ \\
-进入OctoPrint设置界面,PLUGINS->​DisplayLayerProgress Plugin->​Display菜单Visibility选项中,选中如下项目\\+Enter the OctoPrint ​settings interface,PLUGINS->​DisplayLayerProgress Plugin->​Display ​menuIn the Visibility ​option, select the following items\\
 {{ :​octoprint_connect_tina2_15.png?​nolink |}} {{ :​octoprint_connect_tina2_15.png?​nolink |}}
 \\ \\
-Message output选项中,选中Printer Display,并将其设置改为+In the Message output ​option, check Printer Display ​and change its settings to
   Progress=[progress]   Progress=[progress]
 {{ :​octoprint_connect_tina2_16.png?​nolink |}} {{ :​octoprint_connect_tina2_16.png?​nolink |}}
 \\ \\
-完成后,点击Save保存退出+When you are done, click Save to save.
 \\ \\
 \\ \\
-====打开与TINA2的通讯====+====Open communication with TINA2====
 \\ \\
-1. 用USB线连接TINA2SparkOne,打开TINA2电源,点击主界面Connection右边的刷新按键,在Serial Port下拉菜单中选择/​dev/​ttyUSB0,在Baudrate下拉菜单中选择57600\\+1. Connect ​TINA2 and SparkOne ​with a USB cable, turn on the TINA2 power supply, click the refresh button on the right side of the main interface ​Connection, select ​/​dev/​ttyUSB0 ​in the Serial Port drop-down menu, and select ​57600 in the Baudrate drop-down menu.\\
 \\ \\
-2. Printer Profile下拉菜单中选择TINA2,在Save connection settingsAuto-connect on server startup前打上勾。\\+2. Select TINA2 in the Printer Profile ​drop-down menu and check the Save connection settings ​and Auto-connect on server startup.\\
 \\ \\
 {{ :​octoprint_connect_tina2_17.png?​nolink |}} {{ :​octoprint_connect_tina2_17.png?​nolink |}}
 \\ \\
-3. 点击Connect按键,切换到Terminal窗口可查看串口的通讯情况。如果连接正常,打印机会自动重启一次,并在Terminal窗口中输出打印机的参数信息。\\+3. Click the Connect ​button and switch to the Terminal ​window to view the serial port communication. If the connection is normal, the printer will automatically restart once and output the printer'​s parameter information in the Terminal ​window.\\
 \\ \\
 {{ :​octoprint_connect_tina2_09.png?​nolink |}} {{ :​octoprint_connect_tina2_09.png?​nolink |}}
 \\ \\
-接下来,你就可以使用Octoprint来控制TINA2LOL+ 
 +Next, you can use Octoprint ​to control ​TINA2.LOL
octoprint_connect_tina2.txt · Last modified: 2019/11/22 01:30 by peter