User Tools

Site Tools


octoprint_connect_f152s

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
octoprint_connect_f152s [2019/11/22 01:53]
peter
octoprint_connect_f152s [2019/11/22 01:55] (current)
peter
Line 18: Line 18:
 {{ ::​octoprint_f152s_03.png?​nolink |}} {{ ::​octoprint_f152s_03.png?​nolink |}}
 \\ \\
-4. In the Axes window, change the speed of the X and Y axes to 4000 and select the Invert control of the Z axis. Click Save to save and exit.\\+4. In the Axes window, change the speed of the X and Y axes to 4000 and select the Invert control of the Z-axis. Click Save to save and exit.\\
 \\ \\
 {{ ::​octoprint_f152s_04.png?​nolink |}} {{ ::​octoprint_f152s_04.png?​nolink |}}
Line 29: Line 29:
 \\ \\
 \\ \\
-====打开与F152S的通讯====+====Turn on communication with the F152S====
 \\ \\
-1. 用USB线连接F152SSparkOne,打开F152S电源,点击主界面Connection右边的刷新按键,在Serial Port下拉菜单中选择/​dev/​ttyUSB0,在Baudrate下拉菜单中选择1000000\\+1. Connect the F152S and SparkOne ​with a USB cable, turn on the F152S power supply, click the refresh button on the right side of the main interface ​Connection, select ​/​dev/​ttyUSB0 ​in the Serial Port drop-down menu, and select ​1000000 ​in the Baudrate drop-down menu.\\
 {{ :​octoprint_connect_tina2_02.png?​nolink |}} {{ :​octoprint_connect_tina2_02.png?​nolink |}}
 \\ \\
-2. Printer Profile下拉菜单中选择F152S,在Save connection settingsAuto-connect on server startup前打上勾。\\+2. Select F152S in the Printer Profile ​drop-down menu and check the Save connection settings ​and Auto-connect on server startup.\\
 \\ \\
 {{ ::​octoprint_f152s_01.png?​nolink |}} {{ ::​octoprint_f152s_01.png?​nolink |}}
 \\ \\
-3. 点击Connect按键,切换到Terminal窗口可查看串口的通讯情况。如果连接正常,打印机会自动重启一次,并在Terminal窗口中输出打印机的参数信息。\\+3. Click the Connect ​button and switch to the Terminal ​window to view the serial port communication. If the connection is normal, the printer will automatically restart once and output the printer'​s parameter information in the Terminal ​window.\\
 \\ \\
 {{ :​octoprint_connect_tina2_09.png?​nolink |}} {{ :​octoprint_connect_tina2_09.png?​nolink |}}
 \\ \\
-接下来,你就可以使用SparkOne来控制F152SLOL+Next, you can use SparkOne ​to control the F152SLOL
octoprint_connect_f152s.txt · Last modified: 2019/11/22 01:55 by peter