User Tools

Site Tools


faq:updatefirmware

Instructions for refresh your firmware


Step1: Turn on your F192 printer, connect the printer to your computer with the USB cable from accessory box.


Step2: Double click the below firmware updater, see below photo:



Step3:
Use a screwdriver or some tools to press the reset button which on the right side of the printer, and DO NOT RELEASE.


Step4:
Click the “update” button AND release the reset button IMMEDIATELY. Now you will see uploading, see below photo.



Wait until the upload is completed:


Step5:
After all this done, go back to the screen and click the “restore factory”, then shut down your printer. After a few seconds, restart your printer. Now resetting process is finished!

faq/updatefirmware.txt · Last modified: 2018/10/22 03:36 by caojie